Haier HL42XZK2a Important Safety Instructions Manual

Haier HL42XZK2a Important Safety Instructions Manual Manual pdf 36 page image

Universal Remote Control / Maintenance / SpecificationHaier LCD HDTV EN-36No picture,no soundVerify if the television is properly plugged.Verify if the television is properlysupplied power.Verify if electricity is available.Blank screenVerify if correct signals are input.Press INPUT button to change signalinput to TV input.Restart the television of power supplyis interrupted.No soundPress Mute button and verify if Mutemode is set.Switch to other channel and verify ifthe same problem happens.Press VOL+ button to see if theproblem can be solved.Poor sound Verify if sound system is correct. Referto Page 20 for adjustments.No picturein somechannelVerify if correct channel is selected.Adjust the antenna.Make adjustments by Fine Tune andManual Scan.No colorfor somechannelprogram(black andwhite)Verify if the same problem exists inother channels.Check out of picture and soundsystems.Refer to relative instructions in theManual for color adjust.Spots withsome or allpicturesVerify if the antenna is correctlyconnected.Verify if the antenna is in goodcondition.Make fine adjustment of channel.Horizontal/vertical barsor pictureshakingCheck for local interference such asan electrical appliance or power tool.Televisionout ofcontrolDisconnect the television from powersupply and, 10 seconds later, connectthe television to the power supply.If the problem still exists, contactauthorized after-sales service fortechnical assistance.NoteDo not leave the television with static picture inRan extended period as the image may becomepermanently burned.NoteProduction of the LCD screen requires high andRprecision technologies. However, there might besome dark or bright (red, blue or green) spots,or some anomalistic stripes or spots. This is notdefect. If the TV set is used in an area 2,400 metersabove the sea level where the air pressure is below750 hpa, the picture on the LCD screen may beaffected and a muffled sound might be produced.These phenomena might happen in the area1,500 meters above the sea level. This is resultedfrom difference between air pressures inside andoutside the display. This is not a defect covered bythe limited warranty.WarrantyWarrantyThis Haier brand product, when shipped in its originalcontainer, will be free from defective workmanship andmaterials, and agrees that it will, at its option, either repairthe defect or replace the defective product with a new orremanufactured equivalent at no change to the purchaser,for parts or labor for the periods set forth below:This warranty does not apply to the appearance of theproduct or the exterior of the product, which has beendamaged or defaced, altered or modified in designor construction. It does not apply to the additionalexcluded items set forth below:The warranty commences on the date the item waspurchased and the original purchase receipt mustbe presented to the authorized service center beforewarranty repairs are rendered.The limited warranty described herein is in additionto whatever implied warranties may be granted topurchasers by law. ALL IMPLIED WARRANTIES INCLUDINGTHE WARRANTIES OF MERCHANTABILITY AND FITNESSFOR USE ARE LIMITED TO THE PERIOD(s) FROM THE DATEOF PURCHASE SET FORTH BELOW. Some states do notallow limitations on how long an implied warranty lasts,so the above limitation may not apply to you.Neither the sales personnel of the seller nor any otherperson is authorized to make any warranties other thanthose described herein, or to extend the duration of anywarranties beyond the time period described herein onbehalf of Haier.The warranties described herein shall be the sole and

/ 38

Related manuals for Haier HL42XZK2