Haier HLA15 User Manual
                           | |
Contents
| 
Menu OperationsFunction Menu Options ContinuedTT2 to TT4 :For other modes of information displayed by broadcasters.(This blocks a large portion of the picture on your screen).IMPORTANT: Closed captioning availability entirely depends on broadcasterssupplying the signal. Therefore, closed captioning might not always beavailable and language availability will differ by broadcast.Note: Select CC1 for full translation of the primary language such as English inyour area. Select CC2 for secondary language translation such as French orany other language that may be broadcast in your area.5.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set ON, the screenwill turn blue after 3 seconds if there is no signal.6.ASPECT RATIO: Press to select display mode.(FULL SCREEN and ZOOMfor model HLA15; FULL SCREEN ,4:3,16:9,CINEMA and ZOOM for modelHLA19)7. RESET : Press VOL+ to reset some settings to the factory default .Adjust Menu Options1. Press MENU and VOL+/VOL- button until the following menu appears on thescreenADJUSTAUTO CONFIGPHASECLOCKH POSITIONV POSITIONNote: This menu appears only in PC mode .2. Press CH+/CH- button to enter the adjust menu and to go up and down toselect the desired option .3.Press VOL+/VOL- button to increase and decrease the level to adjust theselected option to your preference .4. Repeat step 2 and step 3 until desired quality has been achieved .Functions:AUTO CONFIG :PHASE :CLOCK :Automatically adjusts picture location frequency and phaseparameters .Removes any horizontal distortion and clears or sharpens the displayedcharacters .Adjust the TFT-LCD to match the PC input source clock frequency0505050 |
Related manuals for Haier HLA15
manualsdatabase
Your AI-powered manual search engine