22Lightly tighten the screws all around when the speaker is flush with the drywall.7. Before you fully tighten your speakers into place, use your tape measure and level to make sure youhave it positioned exactly the way you want it. See Photo #4TECHTIP: Keep in mind that even though the speaker may be level, a bookcase oranything else in the room that is not level can make a level speaker look crooked. Havesomeone stand back as you hold it to make sure it looks good with the rest of the room.8. Once you have tightened your speaker into place, the last step is to insert the grille that came withyour speaker. This is a decorative cover that conceals the components of the speaker itself. Thesegrilles are usually a very tight fit and can bend if not inserted carefully. Start with one side of the grilleand work it into the groove without forcing it. They are a very precise fit, and any creases will be verynoticeable if you end up forcing it, so take your time.If you've made it to this point, congratulations on a job well done!6 External Equipment ConnectionsAccessoriesRemote Control User Manual BatteryAntenna ConnectionGenerally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or anoutdoor antenna . location and antenna positioning