Haier HLC32K2 Owner's Manual

Also see for HLC32K2: Service manual

Haier HLC32K2 Owner's Manual Manual pdf 3 page image

Safety InstructionsHaier LCD HDTV/DVD EN-2Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.LASER SAFETY: This unit employs a laser. Only a qualified service person should remove the cover or attempt toservice this device, due to possible eye injury.CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREINMAY RESULT IN HAZARDOUS RADIATION EXPOSURE.CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STAREINTO BEAM.LOCATION: INSIDE, NEAR THE DECK MECHANISM.FCC STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, use and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However there is no guarantee that interference will not occur in particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encourage to try to correct the interference by one or more of thefollowing measures:*Reorient or relocate the receiving antenna.*Increase the separation between the equipment and receiver.*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.*Consult the dealer or an experienced radio/TV technician for help.This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may be not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesiredoperation.FCC CAUTION:To assure continued compliance and possible undesirable interference, the provided ferrite cores must be usedwhen connecting this LCD display to video equipment; and maintain at least 40cm spacing to other peripheraldevice.CANADIAN NOTICE:This Class B digital apparatus compiles with Canadian ICES-003.