Haier HLH32BB Owner's Manual
Also see for HLH26BB: Service manual
                              | |
Adjustment SetupAdjusting setupWhen VGA DVI input mode is setBCA1. Press MENU button on the remote control and foroption of picture position adjust(ADJ).2.3. Press button for desired adjust parameter option.4. Press for desired adjust parameter option untilsatisfactory value is achieved. When VGA signals areNote:Adjust, RGB and Reset are functional only under VGA and DVI mode, and Auto Sync is functional only in VGA mode.Adjustment Setup//5) Under the VGA signal, there are Full Screen , One to One and4:3 Mode for Display mode to select.Under the AV1/ S-Video/AV2 signal, there are Full Screen,Vertical Zoom, Half Zoom, Panorama and 4:3 Mode forDisplay Mode to select.Under the DVI signal, there are Full Screen and 4:3 Mode forDisplay Mode to select.Press to enter the menu of picture position setup1)Adjust is opted for adjusting H Position and V Position as well as relativeparameters in VGA and DVI modes.(Phase Adjust is notavailable in DVI)BCA2)RGB is opted for adjustment of the numerical value of red,green and blue in VGA/DVI mode.3)Reset is opted for adjustment of parameters (After theoperation, Complete will be on the right of the option)4)Auto Sync is opted for adjustment of picture location freque-ncy and phase parameters in VGA mode.(Not available inDVI) (After the operation, Complete will be on the right ofthe option)BCA00000000//Notavailable20 LCD TV Monitor6) Color Temperature is opted for color parameters of Cold,Normal and Warm.In VGA and DVI input mode , H Position and V Position can be used toadjust the picture position.received , the automatic mode (Auto Sync) is used forparameter adjustment |
Related manuals for Haier HLH26BB
manualsdatabase
Your AI-powered manual search engine