Operating instructions SLEEP functionUsing SLEEP functionBefore using this function, the time must be checkedand set. After the unit starts, set the operation status,then press "SLEEP" key.Before going to bed, you can press the "SLEEP"key on the remote controller and the air condit-ioner will operate in comfortable SLEEP modeand bring you a sound sleep.Operation ModeIn COOL/DRY mode1 hour after SLEEP mode starts, temp. will become1*higher than temp. setting. After another 1 hour,temp. rises by 1* further. The unit will continueto run for further 6 hours and then automaticallystops. The controlled temperature is higher thantemperature setting so that room temperature wontbe too low for your sleep.In HEAT mode(unavailable for cool only models)1 hour after SLEEP mode starts, temp. will become2*lower than temp. setting. After another 1 hour,temp. decreases by 1* further. This temperaturewill be maintained for 3 hours before rising by 1*.The unit will continue to run for further 3 hours andthen stops automatically. The controlled temperatureis lower than temperature setting so that roomtemperature wont be too high for your sleep.In AUTO modeThe unit operates in corresponding SLEEP modeadapted to the automatically selected operation mode.In FAN modeSLEEP function is not available.Sleep operation starts Sleep operation stopsAbout 6 hr Sleep tem-perature1 hr1 hrRise by 1*Rise by 1*TemperaturesettingUnit stopsIn COOL/DRY modeTemperaturesetting Unit stops1 hr1 hrSleep operation starts Sleep operation stopsSleep tem-perature3 hrDecrease by 2*Decrease by 2* About3 hrIn HEAT modeRRise by1*AMLOW MIN HIGHAUTOSETTEMPTIMERSETCLOCKTIME SLEEP TEMPSWINGFANSPEED MODE1 2