Haier HPC12XCR Installation And User Manual

Also see for HPC12XCR: Installation and user manual Installation and user manual

Contents

RESETTESTPOWER SUPPLY CORDWiring Requirements• 115 Volt, 60Hz, 15-amp fused grounded 3 prong outlet• The use of a time-delay fuse or time-delay circuit breakeris recommended.• Use a dedicated circuit only.NOTE: Do not operate any other electrical appliances onthis circuit or you may trip the circuit breaker/fuse.If this power supply cord is damaged, it cannot be repaired. Itmust be replaced with a cord from the product manufactur-er. If the power supply cord is damaged call Haier CustomerService: 1-877-337-3639.To test the power supply cord before operation:1 Plug the power cord into a grounded 3 prong outlet.2 Press the Test button, and then press and release theReset button to restore power.REQUIRED GROUNDING METHODThis air conditioner must be grounded. The air conditioner isequipped with a power supply cord that has a 3 prong groundingplug. The power supply cord must be plugged into a mating,grounded 3 prong outlet, and grounded in accordance with alllocal codes and ordinances.115V15 AmpINSTALLATION REQUIREMENTSWARNINGElectrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove the ground prong from the power cordplug.Do not use an adapter.Do not use an extension cord.Failure to do so can result in death, fire or electricalshock.ELECTRICAL REQUIREMENTSTOOLS AND PARTSGather the required tools and parts before startinginstallation.PARTS SUPPLIEDExhaust Hose Hose Connector Hose ConnectorCover #5 Window Panel andExtension Panel (3)LOCATION REQUIREMENTS• Place the air conditioner on a flat, level surface in alocation that is at least 20” (51 cm) from any wall.NOTE: The recommended distance from the window foroptimal performance is 31.5 inches.• Maintain a minimum 20” (51 cm) clearance around the airconditioner to not block airflow.• Keep the air conditioner free of any obstructions such asdrapes, curtains, blinds, etc.• The exhaust hose should be free of any obstructions.• Do not place the air conditioner on an unstable or raisedsurface because it could fall and cause damage or injury.• Do not place the air conditioner in direct sunlight or neara heat source such as baseboard heaters, stoves, etc.• The window panel can be installed in a window with aminimum 20” (51 cm) to a maximum 40” (101.6 cm)opening.ENGLISH4