Haier HPU-42CF03 Operation And Installation Manual

Also see for HPU-42CF03: Manual

Haier HPU-42CF03 Operation And Installation Manual Manual pdf 13 page image

Manual OperationRemote controller operation11Operation Timer ON-OFF FunctionSet clock correctly before starting TIMER operation1.Unit startAfter unit start, select your desired operation mode (operationmode will be displayed on LCD)2.TIMER mode selectionPress TIMER button on the remote controller to change TIMERmode. Every time the button is pressed, display of TIMER modechanges as follows:OFF3.Time setting for TIMER ON4.Timer confirming for TIMER ONAfter setting correct time, press TIMER button to confirm time.Now5.Timer setting for TIMER OFFPress time buttons and follow the same procedures in " Time setting for TIMER ON"Press time buttonON stops to flash, while starts flashing.6.Time confirming for TIMER OFFAfter time setting, press SET button to confirm time. stops to flash.7.Canel TIMER modeJust press TIMER button several times until TIMER mode disappears.According to the time setting sequence of TIMER ON and TIMER OFF, either start-stops orstops-start can be realized.If the time setting of TIMER ON is the same as TIMER OFF, TIMER ON-OFF function cannotbe set.ONThen select TIMER ON-OFF mode. will flash.Every time the button is pressed, time increases 10 minuts.If the button is kept pressed, time will changes quickly.Every time the button is pressed, time decreases 10 minuts.If the button is kept pressed ,time will changes quickly.It can be adjusted within 24 hours at will.AM refers to morning and PM refers to afternoon.OFFHEATFRESHHIGH/SOTIMERSETFILTERAHEALTHRESET LOCKSLEEPFANTEMPONOFFSWINGMODECLOCKCODE LIGHTOFF13 6542ON OFF ON OFFAM 12:00 AM 12:00PM 12:00 PM 12:00TIMER ON TIMER OFF TIMER ON-OFFblank