Haier HS-08CD12 Operation Manual

Contents

Air Conditioner Edition:2006/02/07Auto mode2433About Auto OperationUnder the mode of auto operation, air conditioner willautomatically select Cool or Heat operation accordingto room temperature.5.Unit stopPress ON/OFF button, the unit stops.1. Unit startPress ON/OFF on the remote controller, unit starts.2.Select operation modePress MODE button. For each press, operation modechanges as follows:Remote controller:Then Select Auto operationPress FAN button. For each press, fan speed changes asfollows:Remote controller:Press TEMP. buttonEvery time the button is pressed, temp.settingincrease 1 C,if kept depressed, it will increaserapidlyEvery time the button is pressed, temp.settingincrease 1 C,if kept depressed, it will decreaserapidlySelect a desired temperature.4.Fan speed selection3.Select temp.settingAir conditioner is running under displayed fan speed.When FAN is set to AUTO, the air conditionerautomatically adjusts the fan speed according to roomtemperature.LOWHIAUTOCOOL DRY FAN51AUTOIn Auto mode, the unit will select operation mode automatically according to room temp.Auto mode:Air conditioner automatically changes between COOL and DRY and from mode.DRY mode.(more details in DRY operation).Cautionswhen below 22 C, in FAN mode, fan speed automatically changs according to operation mode.In AUTO mode, no temp. figure is displayedFAN mode:when air conditioner is only in FAN mode,temp.setting is invalid, fan speed can be setas desired.when room, temp. is over 26 C,in COOL mode; when room temp. is between 26 C and 22 C,inRemote Controller7