Haier HSU-07HRA03 - annexe 1 Operation Manual

Also see for HSU-07HRA03: Installation manual

Contents

OperationTIMER OperationYou can let unit start or stop automatically at following times: Before you wake up in themorning, or get back from outside or after you fall asleep at night.Set Clock correctly before starting Timer operationTIMER ON/OFFPower indicator on indoor unit lights up.(1)After unit start, select your desired operation mode.Operation mode will be displayed on LCD.(2)TIMER mode selectionPress TIMER button to change TIMER mode.Every time the button is pressed, display changes as follows:ON OFF ON OFFTIMER ON TIMER OFF TIMER ON-OFFblankSelect your desired TIMER mode (TIMER ON or TIMEROFF) ON or OFF will flash.(3)Timer settingPress HOUR / button.Every time the button is pressed, time increases 10 min.If button is kept depressed, time will change quickly.Every time the button is pressed, time decreases 10 min.If button is kept depressed, time will change quickly. Timewill be shown on LCD. It can be adjusted within 24 hours.Timer mode indicator on indoor unit lights up.(4)Confirming your settingAfter setting correct time, press SET button to confirm, "ON"or "OFF" stops flashingTime displayed: Unit starts or stops at x hour x min. (TIMERON or TIMER OFF).To cancel TIMER modeJust press TIMER button several times until TIMER mode disappears.HintsAfter replacing batteries or a power failure happens, Time setting should be reset.Remote controller possesses memory function, when use TIMER mode next time, justpress SET button after mode selecting if timer setting is the same as previous one.ON/OFF TEMPSETTIMERCLOCKSWINGSLEEPLOCK RESETFANMODEHEALTHAMoCON12343