Haier HSU-07HVA103/R2 - annexe 1 Operation Manual

Also see for HSU-07HV03/R2(DB): Operation manual Operation manual Installation manual Operating manual Installation manual

Contents

Haier HSU-07HVA103/R2 - annexe 1 Operation Manual Manual pdf 17 page image

Remote ControllerTimer On/Off OperationOperationHints:After replacing batteries or a power failure happens, time setting should be reset.Remote controller possesses memory function, when use TIMER mode next time,just press SET button after mode selecting if time setting is the same as previousone.16Set clock correctly before starting TIMER operation.1. After unit starts, select your desired operation modeOperation mode will be displayed on LCD.2. Timer mode selectionPress TIMER button to change TIMER mode. Everytime the button is pressed, display changes as follows:Remote controller:BLANKTIMER ON TIMER OFF TIMER ON-OFFThen select your desired TIMER mode (TIMER ON orTIMER OFF). " "or " "will flash.3.Time settingPress HOUR button.Every time the button is pressed, time settingincreases 1 min, if kept depressed, it will increaserapidly.Every time the button is pressed, time settingdecreases 1 min, if kept depressed, it will decreaserapidly.It can be adjusted within 24 hours.4.Confirming your settingAfter setting correct time, press SET button to confirm" "or" "on the remote controller stops flashing.Time displayed: Unit starts or stops at x hour x min.(TIMER ON or TIMER OFF).5.Cancel TIMER modeJust press TIMER button several times until TIMERmode disappears.POWER/SOFT