Haier HSU-09CG13-B - annexe 1 Installation Manual

Also see for AMS12H03: Operation manual

Contents

Outdoor unit1.Installation of Outdoor Unit2.Connection of pipesInstall according toTo bend a pipe, give the roundness as large as possible not to crush the pipeConnecting the pipe of gas side first makes working easier.The max vertical distance between the indoor unit and the outdoor unit is 5 m.Drawing for the installation of indoor and outdoor unitsHalf union Flare nutSpanner Torque wrench6Outdoor unitForced fastening without careful centeringmay damage the threads and cause aleakage of gas.Be careful that matters, such as wastes of sands, etc. shall not enter the pipe.Pipe Diameter ( )Liquid side 6.35mm(1/4")Gas side 9.52mm(3/8")Fastening torque18N.m42N.mGas side 12.7mm(1/2") 50N.mGas side 15.88mm(5/8") 60N.mLiquid side 9.52mm(3/8") 40N.m3.Connection4.Attaching Drain-ElbowUse the same method on indoor unit. Loosenthe screws on terminal block and insert theplugs fully into terminal block, then tighten thescrews.Insert the cable according to terminal numberin the same manner as the indoor unit.If wiring is not correct, proper operation cannot be carried out and controller may bedamaged.Fix the cable with a clamp.If the drain-elbow is used, please attach it asfigure.Note: Only for heat pump unit. Drain hose

/ 8

Related manuals for Haier AMS12H03