Haier HSU-09H03/VA - annexe 1 Operation Manual

Also see for HSU-09C03/VA(ZXF): Installation manual Operation manual

Contents

Haier HSU-09H03/VA - annexe 1 Operation Manual Manual pdf 14 page image

Operation2.Select operation modePress FAN button. For each press, fan speed changes asfollows:Press MODE button. For each press, operation modechanges as follows:Remote controller:Remote controller:Then Select HEAT operationPress TEMP. buttonEvery time the button is pressed, temp.settingincrease 1oC,if kept depressed, it will increaserapidlyEvery time the button is pressed, temp.settingdecrease 1oC,if kept depressed, it will decreaserapidlySelect a desired temperature.4.Fan speed selection3.Select temp.setting5.Unit stopPress ON/OFF button, the unit stops.AUTOLOW MED HI AUTOCOOL DRY FAN HEATHeat OperationRemote controller 1. Unit startPress ON/OFF on the remote controller, unit starts.13STERILIZEAir conditioner is running under displayed fan speedIN HEAT mode, warm air will blow out after a short periodof the time due to cold-draft prevention function.When FAN is set to AUTO, the air conditionerautomatically adjusts the fan speed according to roomtemperature.FRESH