Haier HSU-09HEG03/R2(DB) Service Manual

Also see for HSU-09HEG03/R2(DB): Operation manual Operation manual

Contents

Haier HSU-09HEG03/R2(DB) Service Manual Manual pdf 47 page image

OperationDomestic Air Conditioner44Function and controlSleep Operation5.Fan Speed in Sleep ModeWhen the unit is set to sleep mode, the fan speedwill be set to low speed and it cannot be changed.Operation Mode1. In COOL,DRY modeSLEEP operation starts SLEEP operation stopsSLEEPoperation startsSLEEPoperation stopsApprox.6hrs1 hr1 hr1 hr3 hrs3 hrsRises 1 OC/ 2 FRises 1 OC/ 2 FRises 1 OC/ 2 FTemp.settingTemp.settingUnit stopUnit stopIn COOL, DRY modeIn HEAT modeDecreases 2O C/ 4 FDecreases 2O C/ 4 F1 hr2.3.In HEAT modeIn AUTO mode4. In FAN modeIt has no SLEEP function.NoteWhen TIMER function is set, the sleep function can’t beset up .After the sleep function is set up, if user resetsTIMER function, the sleep function will be cancelled; themachine will be in the state of timing-on.POWER/QUIET Operation1 hours after SLEEP mode starts,temp.will becomehigher than temp.setting.After another 1 hours,temp.risesby 1 / 2 F futher. The unit will run for further 6 hours thenstops Temp. is higher than temp.setting so that roomtemperature won’t be too low for your sleep.1 hours after SLEEP mode starts,temp will become 24 F lower than temp.setting.After another 1 hours,tempdecrease by 2 C / 4 F futher.After more another 3 hours,temp. rises by 1 C / 2 F futher.The unit will run for further3 hours then stops.Temp.is lower than temp. setting sothat room temperature won’t be too high for your sleep.If the unit is running cooling, the sleep mode will followthe function as in cool mode, while follow as in heat mode.O COO1 OC/2 FOC /Press button to enter additional options, cyclethe display to , will flash. And then pressenter for sleep function.(1) POWER Operation(2) QUIET OperationNote ：When you need rapid heating or cooling, you can use this function.You can use this function when silence is needed for rest or reading.Running the unit in QUIET mode for a long period maycause the room temperature to not reach the settemperature. If this occurs, cancel QUITE mode and setthe fan speed to a higher setting.Press QUIET button, the remote controller will show ,and then achieve to the quiet function. To cancel thisfunction, press the QUIET button again and it will becanceled.Press button to enter additional options, cycle thedisplay to , will flashand then press ,enter topower function. To cancel this function, please select adifferent option.OOOOOOOOOO