Haier HSU-09HEK03 Operation Manual

Also see for HSU-09HEK03: Operation manual Installation manual Installation manual Installation manual Manual

Contents

Haier HSU-09HEK03 Operation Manual Manual pdf 15 page image

Comfortable SLEEPOperationBefore going to bed, you can simply press theSLEEP button and unit will operate in SLEEPmode and bring you a sound sleep.Use of SLEEP functionAfter the unit starts, set the operation status,then press SLEEP button before which theclock must be adjusted and time being set.OperationON/OFFFANMODETIMERCLOCKSET SLEEPLOCK RESETSWINGOperation Mode1. In COOL,DRY mode1 hours after SLEEP mode starts, temp. willbecome 1OC higher than temp. setting. Afteranother 1 hours, temp. rises by 1 OC further.The unit will run for further 6 hours then stops.Temp. is higher than temp. setting so that roomtemperature won't be too Iow for your sleep.SLEEP operation starts SLEEP operation stopsApprox.6hrs1 hr Rises 1 OCRises 1 OCTemp.setting Unit stopIn COOL, DRY mode1 hrPower Failure Resume FunctionIf the unit is started for the first time, thecompressor will not start running unless 3minutes have elapsed. When the powerresumes after power failure, the unit will runautomatically, and 3 minutes later thecompressor starts running.3. In AUTO modeThe unit operates in corresponding sleepmode adapted to the automatically selectedoperation mode.4. In FAN modeIt has no SLEEP function.When TIMER function is set , the quiet sleepingfunction can't be set up .After the sleeping functionis set up,if user resets TIMER function, the sleepingfunction will be cancelled; the machine will be in thestate of timing-on,if the two modes are set up at thesame time ,either of their operation time is endedfirst ,the unit will stop automatically,and the othermode will be cancelled.5.Note to the power failure resume:press the sleep button ten times in five secondsand enter this function after hearing four sounds.And press the sleep button ten times within fiveseconds and leave this function after hearingtwo sounds.When quiet sleeping function is set to 8 hours,the quiet sleeping time can not be adjusted.142. In HEAT mode1 hours after SLEEP mode starts, temp willbecome 2O C lower than temp.setting. Afteranother 1 hours, temp decrease by 2 COfurther. After more another 3 hours, temp.rises by 1 C further. The unit will run forOSLEEPoperation startsSLEEPoperation stops1 hr1 hr3 hrs3 hrsRises 1 OCTemp.setting Unit stopIn HEAT modeDecreases 2O CDecreases 2O Cfurther 3 hours then stops. Temp. is lowerthan temp. setting so that room temperaturewon't be too high for your sleep.