Haier HSU-09HG13-B - annexe 1 Operation Manual

Also see for HSU-09HG13-B: Installation manual

Contents

(4) Unit stop(1) Unit start6Auto run, Fan operation Enjoy yourself by just a gentle press.Operationmode changes as follows:Press ON/OFF button, unit starts.Previous operation status appears on display.(Not Timer setting)Power indicator on indoor unit lights up.(2) Select operation modePress MODE button. For each press, operationAUTO COOL DRY HEAT FANUnit will run in selected mode.Stop display at " " AUTO or " "FAN.(3) FANPress FAN button. For each press, fan speed changesas follows:AUTO LO MED HIUnit will run at selected fan speed.Note:AUTO is not available in FAN mode.Press ON/OFF button.Only time remains on LCD.All indicators on indoor unit go out.Vertical flap closed automatically.HintsRemote controller can memorize settings in each operation mode. To run it next time justselect the operation mode and it will start with the previous setting.No reelecting is needed.(TIMER ON/OFF needs reelecting)Cautions: Note:On cooling only unit, heating mode is not available, The above information is theAfter replacing batteries, press ON/OFF, and display explanation of the displayedbecomes as follows: information therefore variesOperation mode: AUTO, Temp. No with those displayed in actualoperation.ON/OFF TEMPSETTIMERCLOCKSWINGSLEEPLOCK RESETFANMODE1234