Haier HSU-09LF03 - annexe 1 Operation Manual

Also see for HSU-09LF03: Installation manual

Contents

12MaintenanceDifferent models have different appearanceCleaning of unit casingCleaning of remote controllerCleaning of air filterCut off power supplybefore cleaning unit casing with soft cloth.In case of heavy stain, clean it with neutral detergent.squeeze water in the cloth, wipe off the detergent on unitcasing completely.Don't use water to wash unit casing, please use dry cloth.Don't use glass cleaner or cloth soaked with chemicals.1.Open inlet grille by pulling it upward.Air Filter2.Remove air filterPush up the filter's center tabslightly until it is caesura ofthe stopper. Remove it bypulling down.3.Clean the filterUse a vacuumcleaner to removedust,or wash thefilter with water.After washing,dry the filtercompletely in the shade.5.Close the inlet grille.4.Attach the filterAttach filter behind the stopper so thatthe "Front" indication is facing to the front. Make surethat it is completely behind the stopper, otherwiseproblems might occur.

/ 16

Related manuals for Haier HSU-09LF03