Haier HSU-09RHA103/R2 - annexe 1 Operation Manual

Also see for HSU-09RHA103-R2: Installation manual

Contents

6Parts and Functions11. TIMER ON display12. FAN SPEED displayLOW HIMED AUTO13. LOCK display14. SWING UP/DOWN display15. SLEEP display16. HEALTH displayUsed to select your desired temperature.18. Operation mode display20. POWER/SOFT display21. Left/right air flow displayRemote controller: to display the TEMP. setting.22. TEMP display23. TIMER OFF display24. CLOCK display25. TEMP buttonUsed to select fan speed: LOW,MED, HI, AUTO.26. FAN buttonUsed to set the health airflow mode.27. HEALTH AIRFLOW button28. SWING UP/DOWN buttonUsed to select up or down air sending direction.29. SWING LEFT/RIGHT buttonUsed to select left/right air flow.30. FRESH buttonUsed to confirm timer and clock settings.31. SET button32. POWER/SOFT buttonUse to set fresh air function.Used to lock buttons and LCD display. If pressed, theother buttons will be disabled and the lock conditiondisplay appears. Press it once again, lock will becanceled and lock condition display disappears.33. LOCK34. Ambient temp.display18 1534 16 1711 23Used to set healthy operation.9. HEALTH buttonUsed for unit start and stop.10. ON/OFF buttonUsed to select CODE A or B with a press,A or Bwill be displayed on LCD.Please select A without special explanation.1.CODEWhen the remote controller appears abnormal,use a sharp pointed article to press this buttonto reset the remote controller normal.2.RESETUsed to select TIMER ON, TIMER OFF,TIMER ON-OFF.4. TIMER buttonUsed to set correct time.5. CLOCK buttonUsed to select sleep mode.6. SLEEP button7. MODE buttonUsed to set clock and timer setting.8. HOUR buttonOperation mode AUTO HEAT FANCOOL DRYRemote controllerDisplay boardPOWER/SOFTFRESH281933AUTO COOL DRY FAN HEAT17 30NOTE:(1) The following functions and related displays are not available:(2) Cooling only unit do not have functions and displays related with heating.17.FRESH AIR display19.Singal sending displayWhen receiving the remote control signal, display the settemperature and in the rest time the room temperature isdisplayed and this room temperature is only for reference.3.LIGHT buttonControl the lightening and extinguishing ofthe indoor LED display board.