iFP Operation ECO OperationThe power saving function only works underthe cooling, heating or dehumidifying mode,after the power saving function is set, pressthe sharp, mute, sleep, or smart key to exitthe power saving function.and automatically control the switch of thecompressor, which may be inconsistent withthe user’s setting.The power saving function is more effectiveafter the air conditioning has been runningfor a long time (more than 2 hours)SMARTECOECOSMARTiFPThe movement of people in the room can be sensed,which can improve the air adjustment efficiency.1iFP2Remote controller:BLANKand “ ” is displayed on theEvery time the button is pressed,display changes as follows:In iFP,FOLLOW and EVADE operation mode, Press“ ”AMAM display board, unit will unrinDetect the location of the human body, adjust thewind swing,blow the location where the body is.Detect the location of the human body,adjust thewind swing,avoid the location where the body is.Automatic adjusting with the environmental temperature,running with power saving.OperationPress iFP button “ ” isdisplayed on the remote controlleriFP mode.When several people are located at different positions,orone person is moving in different areas, no matter whetherthe wind is blowing or not, the wind will automatically swingand blow to multi areas, the wind direction adjustment willbe delayed, it cannot be deflected suddenly while detecting.button, the unit will not operate “ ” mode, Press “ ”button, the operation stops.The human body sensor is used to detect if the infraredray is changing. It may be inaccurate in the followingThe human body keeps still (when reading or watchingTV etc.) or is blocked by barriers like screen, cabinetThe person is wearing very thick clothes or the personA pet is moving frequently, or the wind is blowing thecurtains, or something in the room is swinging frequently.or glass.is lying or sleeping.conditions:Press ECONOMY button “ ”is displayed on the remotecontroller,unit will run inECONOMY operation.Press ECONOMY button Fortwice press, ECONOMYdisappears, the operation stops.After the power saving is set, the host machinewill automatically adjust the setting temperature,9