Haier HSU-12CR03-Y - annexe 1 Operation Manual

Also see for HSU-12CR03-Y: Operation manual Installation manual Installation manual

Contents

Operation Sleep OperationRemote ControllerDisplay board14POWER/SOFTFRESHPURIFYPower Failure Resume FunctionIf the unit is started for the first time, thecompressor will not start running unless 3minutes have elapsed. When the powerresumes after power failure, the unit will runautomatically, and 3 minutes later thecompressor starts running2. In AUTO modeThe unit operates in corresponding sleepmode adapted to the automatically selectedoperation mode.3. In FAN modeIt has no SLEEP function.When TIMER function is set, the sleeping functioncan't be set up .After the sleeping function is set up,if user resets TIMER function, the sleeping functionwill be cancelled; the machine will be in the state oftiming-on.4.5.Note to the power failure resume:press the sleep button ten times in five secondsand enter this function after hearing four sounds.And press the sleep button ten times within fiveseconds and leave this function after hearingtwo sounds.Before going to bed, you can simply press theSLEEP button and unit will operate in SLEEPmode and bring you a sound sleep.Use of SLEEP functionAfter the unit starts, set the operation status,then press SLEEP button before which theclock must be adjusted and time being set.OperationOperation Mode1. In COOL,DRY mode1 hours after SLEEP mode starts, temp. willbecome 1OC higher than temp. setting. Afteranother 1 hours, temp. rises by 1OC further.The unit will run for further 6 hours then stops.Temp. is higher than temp. setting so that roomtemperature won't be too Iow for your sleep.SLEEP operation starts SLEEP operation stopsApprox.6hrs1 hr Rises 1OCRises 1OCTemp.setting Unit stopIn COOL, DRY mode1 hr