Haier HSU-12CVY03 Operation Manual

Also see for HSU-12CVY03: Installation manual Installation manual

Contents

FRESHSTERILIZE1.Press ON/OFF to startingThe liquid crystal will display the working state of last time(Except timer, sleeping, power/soft and health airflow).Setting the comfort work conditions.2.The setting of health airflow function1).Press the button of health airflow, appears on thedisplay. The nether inlet and outlet grills of the air conditionerare closed and the airflow is blown horizontally from the aboveinlet and outlet grills. Avoid the strong airflow blows direct tothe body.2).Press the button of health airflow again, appears onthe display. The above inlet and outlet grills of the air conditionerare closed and the airflow is blown vertically from the netherinlet and outlet grills. Avoid the strong airflow blows direct tothe body.Note:1 .After setting the health airflow function, the position of inletand outlet grills is fixed.2.In cooling, it is better to select the mode.3.In cooling and dry, using the air conditioner for a long timeunder the high air humidity, a phenomenon falling drips ofwater occurs at the outlet grille .4.Select the appropriate fan direction according to the actualconditions.3.The cancel of the health airflow functionPress the button of health airflow again, both the inlet andoutlet grills of the air conditioner are opened, and the unit goeson working under the condition before the setting of healthairflow function.After stopping, the outlet grille will close automatically.Notice: Cannot pull direct the outlet grille by hand. Otherwise,the grille will run incorrectly. If the grille is not run correctly, stopfor a minute and then start, adjusting by remote controller.Remote ControllerHealth airflow OperationOperation18SWING FANTEMPMODE HEALTHAIRFLOW SLEEPHEALTHCLOCK SETTIMERRESET CODE LIGHT LOCKoCAMONOFF