Haier HSU-12HD03 Operatiing Manual

Also see for HSU-09H03/R2(DB): Operation manual Installation manual Operation manual Operation manual

Haier HSU-12HD03 Operatiing Manual Manual pdf 13 page image

Dry OperationRemote controller1. Unit startLink with electronic power.Press ON/OFF on the remote controller, unit starts.The liquid crystal will display the working state of lasttime (Except Timer, Sleep, Power/Soft and Healthairflow).2.Select operation modePress FAN button. For each press, fan speed changes asfollows:Press MODE button. For each press, operation modechanges as follows:Remote controller:Remote controller:Then Select DRY operationPress TEMP. buttonEvery time the button is pressed, temp.settingincrease 1 C,if kept depressed, it will increaserapidlyEver y time the button is pressed, temp.settingdecrease 1 C,if kept depressed, it will decreaserapidlySelect a desired temperature.4.Fan speed selection3.Select temp.setting5.Unit stopPress ON/OFF button, the unit stops.COOL operation starts when roomtemp.is higher than temp.setting.On reaching temp.setting +2oCunit will run in mild DRY mode.Ultra-low air flowTemp.setting+2oCTemp.settingAUTOLOW MED HI AUTOCOOL DRY FAN HEATAir conditioner is running under displayed fan speed.In DRY mode, when room temperature becomeslower than temp.setting+2oC,unit will run intermittentlyat LOW speed regardless of FAN setting.Operation11