Haier HSU-18CI03 - annexe 1 Operation Manual

Also see for HSU-18C03(T3): Manual User manual Operation manual Manual Operation manual

Contents

For the purpose of the safety,the air con-ditioner must be properly grounded in acco-rdance with specifications.Always remember to unplug the airconditioner before openning inlet grill. Neverunplug your air conditioner by pulling onthe power cord. Always grip plug firmly andpull straight out from the outlet.All electrical repairs must be carried outby qualified electricians. Inadequate repairsmay result in a major source of danger forthe user of the air conditioner.Do not damage any parts of the airconditioner that carry refrigerant by piercingor perforating the air conditioner's tubeswith sharp or pointed items, crushing ortwisting any tubes, or scraping the coatingsoff the surfaces. If the refrigerant spurtsout and gets into eyes, it may result inserious eye injuries.CautionsDo not obstruct or cover the ventilationgrille of the air conditoner.Do not put fingersor any other things into the inlet/outlet andswing louver.Do not allow children to play with the airconditioner.In no case should children beallowed to sit on the outdoor unit.The refrigerating circuit is leak-proof.Remark per EMC Directive 89/336/EEC.To prevent flicker impression during thestart of the compressor(Technical Process)and the adversely influence caused bythe 2nd harmonies of compressor followinginstallation conditions do apply:1.The power connection for air conditionerhas to be done at the main powerdistribution.This distribution has to be of aIow impedance. Normally the requiredimpedance is reached at a 32A fusing point.2.No other equipment has to be connected:to this power line.3.For the details installation acceptanceplease refer to your contract with the powersupplier, if restrictions do apply for products:like washing machines,air conditioners orelectrical ovens.4.For the details of the power of airconditioner, please refer to the rating plateof the product.5.For any question contact your local dealer.Specifications2