Haier HSU-18CR03 - annexe 1 Operation Manual

Also see for HSU-18CR03: Installation manual

Contents

Operation1.Press ON/OFF to startingThe liquid crystal will display the working state of last time(Except timer, sleeping, power/soft and health airflow).Setting the comfort work conditions.2.The setting of health airflow function1).Press the button of health airflow, appears on thedisplay. The nether inlet and outlet grills of the air condit-ioner are closed and the airflow is blown horizontally fromthe above inlet and outlet grills. Avoid the strong airflowblows direct to the body.2).Press the button of health airflow again, appears onthe display. The above inlet and outlet grills of the air cond-itioner are closed and the airflow is blown vertically from thenether inlet and outlet grills. Avoid the strong airflow blowsdirect to the body.Note:1 .After setting the health airflow function, the position of inletand outlet grills is fixed.2.In cooling, it is better to select the mode.3.In cooling and dry, using the air conditioner for a long timeunder the high air humidity, a phenomenon falling drips ofwater occurs at the outlet grille .4.Select the appropriate fan direction according to the actualconditions.3.The cancel of the health airflow functionPress the button of health airflow again, both the inlet andoutlet grills of the air conditioner are opened, and the unitgoes on working under the condition before the setting ofhealth airflow function.After stopping, the outlet grille will close automatically.Notice: Cannot pull direct the outlet grille by hand. Otherwise,the grille will run incorrectly. If the grille is not run correctly,stop for a minute and then start, adjusting by remote controller.Health airflow OperationRemote controllerPOWER/SOFTFRESH18