Haier HSU-18LEK13 - annexe 1 Operation Manual

Also see for HSU-07HEK03 HSU-09HEK03 - annexe 1: Operation manual Installation manual Installation manual Manual Manual

Contents

Haier HSU-18LEK13 - annexe 1 Operation Manual Manual pdf 3 page image

2OperationUnit start / stopAUTO LO MED HINote:In DRY mode, when room temperature becomes lower than temp.osetting+2 C, unit will run intermittently at LOW speed regardlessIn HEAT mode,warm air will blow out after a short periodof the timeWhen FAN is set to AUTO, the air conditioner automatically adjustsnext time,just press ON/OFF button and unit will run in previous status.Remote controller can memorize each operation status. When starting itCooling only unit do not have displays and functions related with heatingPress ON/OFF button, unit starts or stops.ON/OFFFANHEALTHFANMODESWINGAccording to the automatic choicesystem in temperature in indoorscold or make the hot movementON/OFFHEALTHFANMODEautomatically adjusts1.2.In FAN operation modeAuto OperationCool OperationFANMODESWINGHeat OperationFANMODESWINGDry OperationFANMODESWINGFan OperationWhen FAN is set to AUTO,the air conditionerthe fan speed accordingto roomtemperature.the unit will not operatein COOL mode but onlyin FAN mode ,AUTO is not available in FAN mode.And temp.setting is disabled.of FAN setting.due to cold-draft prevention function.the fan speed according to room temperature.Note:FANMODESWING(1)Air Flow Direction AdjustmSelect temp.setting FANMODESWINGOperationModeAUTORemoteController NoteCOOLDRYHEATFANIn DRY mode, when room temperature becomeslower than temp.setting+2 o C,unit will run intermittentlyat LOW speed regardless of FAN setting.Under the mode of auto operation, air conditioner willautomatically select Cool or Heat operation accordingto room temperature.air conditioner automatically adjusts the fan speedtemperature.When FAN is set to AUTO, theaccording to roomIn FAN operation mode, the unit will not operate inCOOL or HEAT mode but only in FAN mode ,AUTO isnot available in FAN mode.And temp.setting is disabled.In FAN mode,SLEEP operation is not available.