Haier HSU-18LXA03 Operation Manual

Contents

Haier HSU-18LXA03 Operation Manual Manual pdf 5 page image

Comfortable SLEEPOperation43.In AUTO modecorresponding sleep mode adapted to theautomatically selected operation mode.4. In FAN modeIt has no SLEEP function.sleeping function is set up,if user resets TIMER function, thestate of timing-on,if the two modes are set up at the sametime,either of their operation time is ended first,the unit willstop automatically,and the other mode will be cancelled.5. When quiet sleeping function is set to 8 hours the quietNote to the power failure resume:press the sleep button ten times in five seconds and enterfunction after hearing four sounds.And press the sleep buttonten times within five seconds and leave this function afterhearing two sounds.sleeping time can not be adjusted.When TIMER function is2.In HEAT mode1 hours after SLEEP mode starts, temp will become2 C lower than temp.setting. After another 1 hours,temp decrease by 2 C further. After more another3 hours, temp.risesby 1 C further.The unit will runfor further 3 hours then stops.Temp. is lower thantemp. setting so that room temperature won't be toohigh foryour sleep.OOSLEEPoperation starts SLEEPoperation stops1 hr1 hr3 hrs3 hrsRises 1OCTemp.setting Unit stopIn HEAT modeDecreases 2 OCDecreases 2OCThe unit operates in corresponding sleep modeset,the quiet sleeping function can't be set up.After thesleeping function will be cancelled; the machine will be in theOperation Mode1. In COOL,DRY modeSLEEP operation starts SLEEP operation stopsApprox.6hrs1 hr Rises 1 OCRises 1 OCTemp.setting Unit stopIn COOL, DRY mode1 hr1 hours after SLEEP mode starts,temp.will becomehigher than temp.setting.After another 1 hours,temp.risesby 1 futher .The unit will run for further6 hours then stops Temp. is higher than temp.settingso that room temperature won’t be too low for yoursleep.O C1 OCPress button , the remote controller willshow , and then achieve to the sleep function.Press again this button , the sleep function willbe cancelled.ONoteWhen TIMER function is set, the sleeping function can’t beset up .After the sleeping function is set up ,if user resetsTIMER function, the sleeping function will be cancelled; themachine will be in the state of timing-on.Power Failure Resume FunctionIf the unit is started for the first time, the compressor will notstart running unless 3 minutes have elapsed. When the powerresumes after power failure, the unit will run automatically,and 3 minutes later the compressor starts running.Healthy airflow Operation1.Press to startingSetting the comfort work conditions.2.The setting of healthy airflow functionNote:1.After setting the healthy airflow function, the positiongrill is fixed.3.In cooling and dry, using the air conditioner for a longtime under the high air humidity, condensate water mayoccur at the grille .Notice: Do not direct the flap by hand. Otherwise, thegrille will run incorrectly. If the grille is not run correctly, stopfor a minute and then start, adjusting by remotecontroller.2.In cooling, it is better to select the mode.3.The cancel of the healthy airflow functionPress button to enter additional options,Press thisbutton continuously, the louvers location will cycle betweenin the following three locations, to choose the swing locationwhat you needed,and then press button to confirm.Press button to enter additional options,Press thisbutton continuously, the louvers location will cycle betweenin the following three locations again,and then pressbutton to cancel.HealthyairflowupwarderHealthyairflowdownwarderPresentpositionSLEEPSLEEP

/ 8

Related manuals for Haier AS09ZB1HRA