HEALTH Operation HEALTH AIRFLOW OperationNote:1.After setting the health airflow function, the position of inlet2.In heating, it is better to select the mode.3.In cooling, it is better to select the mode.under the high air humidity, a phenomenon falling drips of5.Select the appropriate fan direction according to the actualOperationSMARTThe anion generator in theairconditioner can generate aanion in the air and also to killsediment in the room and finallythe quantity of position andPress HEALTHdisappears,the operation stops.SMARTThe setting of2).Press the button of health airflowAvoid the strong airflow blowsThe cancel ofPress the button of health airflowgrills of the air conditioner are opened, and the unitgoes on working under the condition before thesetting of health airflow function.After stopping, the outlet grille will close automatically.AMAMlot of anion effectively balancebacteria and speed up the dustclean the air in the room.buttonFor each press, is displayedAir conditioner starts healthanion function operation.Press HEALTH button for twice press,When indoor fan motor is running, it has healthyprocess function. (It’s available under any mode)When the fan in the indoor unit does not work,the health lamp lights up, but the anion generatordoes not release anion.health airflowfunction1).Press the button of health airflow,appears on the display. Avoidthe strong airflow blows direct tothe body.again, appears on the display.direct to the body.the health airflowCannot pull direct the outlet grille by hand.Otherwise,the grille will run incorrectly. If the grilleis not run correctly, stop for a minute and then start,adjusting by remote controller.Notice:Remote controller can memorize each operationstatus. when starting it next time, just press ON/OFFbutton and unit will run in previous status.functionand outlet grills is fixed.4.In cooling and dry, using the air conditioner for a long timewater occurs at the outlet grille .conditions.again, both the inlet and outlet6