Haier HSU-24HEA03 Operation Manual

Also see for HSU-24HEA03: Installation manual Installation manual Operation manual Installation manual Installation manual

Contents

Haier HSU-24HEA03 Operation Manual Manual pdf 21 page image

OperationWhen the remote controller is manipulated, it gets the system back to thenormal operation mode.Removal of the restriction of emergency or test operationPress the emergency operation switch once more, or manipulate through theremote controller; the "Pi" sound, the emergency or test operation is terminated.Emergency operationTest operationEmergency and Test Operation (wall-mounted type)Use this operation only when the remote controlleris defective or lost.When the emergency operation switch ispressed,the" Pi "sound is heard once, which meansthe start of this operation.In this operation, the system automatically selectsthe operation modes,cooling or fan or heat,accordingto the room temperature.It is not possible to operate in dry mode.RoomtemperatureOperationmodeDesignatedtemperatureTimermode Air flowABOVE 23O CBELOW 23OCCOOLINGHEAT 23O C26 OC NONOAUTOMATICAUTOMATICTest operation switch is the same as emergency switch.Use this switch in the test operation when the roomtemperature is below 16OC, do not use it in the normaloperation.Continue to press the test operation switch for morethan 5 seconds. After you hear the "Pi" sound twice,release your finger from the switch: the cooling operationstarts with the air flow speed "Hi".After 30 minutes, test operation ends automatically.20PiPi Pi(Cooling only uint）Room temperatureOperationmodeDesignatedtemperatureTimermode Air flowBELOW 23O C FAN 26 OC NO AUTOMATIC