Haier HSU-24LEA03-T Operation Manual

Also see for AMS30H03-N(T3): Operation manual Installation manual Installation manual Installation manual Installation manual

Contents

Haier HSU-24LEA03-T Operation Manual Manual pdf 16 page image

If the wind speed is high or middle beforesetting for the sleep, set for lowing the windspeed after sleeping. If it is low wind, no change.5.Set the wind speed change when sleepingBefore going to bed, you can simply press theSLEEP button and unit will operate in SLEEPmode and bring you a sound sleep.Use of SLEEP functionAfter the unit starts, set the operation status,then press SLEEP button before which theclock must be adjusted and time being set.Operation Mode1. In COOL,DRY mode1 hours after SLEEP mode starts, temp. willbecome 1OC higher than temp. setting. Afteranother 1 hours, temp. rises by 1OC further.The unit will run for further 6 hours then stops.Temp. is higher than temp. setting so that roomtemperature won't be too Iow for your sleep.Remote ControllerSLEEP operation starts SLEEP operation stopsSLEEPoperation startsSLEEPoperation stopsApprox.6hrs1 hr1 hr1 hr3 hrs3 hrsRises 1OCRises 1 OCRises 1 OCTemp.settingTemp.settingUnit stopUnit stopIn COOL, DRY modeIn HEAT modeDecreases 2OCDecreases 2O C1 hrSleep Operation2.3.In HEAT mode1 hours after SLEEP mode starts, temp willbecome 2 OC lower than temp. setting.After another1 hours, temp decrease by 2 OC further. After moreanother 3 hours, temp. rises by 1O C further. Theunit will run for further 3 hours then stops.Temp. is lower than temp. setting so that roomtempe rature won't be too high for your sleep.In AUTO modeThe unit operates in corresponding sleepmode adapted to the automatically selectedoperation mode.4. In FAN modeIt has no SLEEP function.Operation15NoteWhen TIMER ON function is set,the sleeping functioncan't be set up.After the sleeping function is set up,ifuser resets TIMER ON function,the sleeping functionwill be cancelled; the machine will be in the state ofPOWER/SOFTtiming-on.Power Failure Resume FunctionIf the unit is started for the first time, the compressorwill not start running unless 3 minutes have elapsed.When the power resumes after power failure, theunit will run automatically,and 3 minutes later thecompressor starts running.