Haier HT-20216C User Manual
               | |
2.1 Monitor angle adjustmentTo ensure a healthy and comfortable body posture while using themonitor, you can adjust the monitor within a range of approximately -5°~ 15°2.2 Base, bracket installation and unloadinga. Mount the bracket to the display b.Mount the base to the bracket a.Press and hold the bracket hook to remove the base b. Remove the stand from the display2.3 Monitor Installation1, Turn off the computer and unplug the power cord2, Connect the signal cable to the signal connector on the back of the computer and rotate the screws atthe ends of the signal cable.3, Connect the AC output of the power cord to the AC input of the rear case of the monitor and plug thepower cord into the nearest movie jack.4, Turn on the power switch of the computer and monitor. If there is image on the monitor, you havesuccessfully installed it. If the monitor has no image, you should check all the cables.（optional）6Installation NotesDVIDVI VGA ACDVI cable-5°~ 15°-5°~ 15°Please refer to the figure belowto installPlease refer to the figure belowto uninstallMonitor input terminal overview1, AC port2, DVI port3, VGA portNote: The specific ports and signal cable, pleaserefer to the actual product. |
Related manuals for Haier HT-20216C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine