Haier HWE18VCN Service Manual

Also see for HWE18VCN: User & care guide

Contents

HWE18VCN Parts and FunctionsDomestic Air Conditioner15Using the Remote CotrolON/OFFMODESPEEDTIMERTEMP/TIMETEMP/TIMERemote control may differ in appearance from the image shown.NOTE: Remove and discard protective film prior to use. The remote control runs on one CR2025 battery (included).Replace battery after 6 months of use,or when the remote control starts to lose power. To change battery,first remove screw on back panel of remote.POWERPress ON/OFF to turn on the air conditioner.ModePress MODE to choose Fan, Cool, Energy Save or Dehum.SpeedPress SPEED to choose High, Med, Low or Auto Cool.TIMERTo set the air conditioner to turn off after a set amount between 1 hour and 24 hours (unit must be ON):1. .hsalflliwlenaplortnocrenoitidnocriaehtnothgilrotacidniFFOremiT.REMITsserP2. .sruoh42otruoh1morfemityaledehtegnahcotnottubworranwodropuEMIT/PMETehtsserP3. .noniamerlliwlenaplortnocrenoitidnocriaehtnothgilrotacidniFFOremiT,sdnoces5retfATO SET TIMER TO TURN ON THE AIR CONDITIONER, KEEPING PREVIOUS SETTINGS:1. Turn on the air conditioner.2. hsalflliwlenaplortnocrenoitidnocriaehtnothgilrotacidninOremiT.REMITsserP3. .sruoh42otruoh1morfemityaledehtegnahcotnottubworranwodropuEMIT/PMETehtsserP4. .noniamerlliwlenaplortnocrenoitidnocriaehtnothgilrotacidninOremiT,sdnoces5retfATO SET TIMER TO TURN ON THE AIR CONDITIONER, AND CHANGE THE PREVIOUS SETTINGS:1. Turn on the air conditioner.2. Adjust the mode to Fan,Cool,Energy Save or Dehum.3. nafehttsujda,edomevaSygrenErolooCroF.woLrodeM,hgiHotdeepsnafehttsujda,edommuheDronaFroFspeed to High,Med, Low or Auto Cool.4. Adjust the temperature between 61°F and 86°F (16°C and 30°C).NOTE: In Fan mode, the temperature cannot be set.5. gniniamerwohslliwyalpsiD.hsalflliwlenaplortnocrenoitidnocriaehtnothgilrotacidninOremiT.REMITsserPhours before the air conditioner will turn on.6. .sruoh42otruoh1morfemityaledehtegnahcotnottubworranwodropuEMIT/PMETehtsserP7. Timer On indicator light on the air conditioner control panel will remain on.