Haier L1510B-A User Manual

Also see for L1510B-A: User manual User manual User manual

Contents

Haier L1510B-A User Manual Manual pdf 12 page image

Connection InstructionsVCR SetupConnection and use steps:1.Read the user guide supplied with your AV devices and ensure that it hasComposite or S-Video connectors;2.Make sure that the power of the LCD-TV and the AV device are off;.Turn on the LCD-TV first ; and then turn on thepower of the AV device;4.Press the INPUT button to set the videoinput mode of the LCD-TV toS-VIDEO mode or A/V mode.Connection Option 1Set VCR output switch to 3 or 4 and thentune TV to the same channel number.Connection Option 21. Connect the audio and video cables fromthe VCR's output jacks to the TV input jacks,as shown in the figure.When connecting the TV to VCR, matchthe jack colors (Video = yellow, AudioLeft = white,and Audio Right = red).If you connect an S-VIDEO output fromVCR to the S-VIDEO input, the picturequality is improved; compared to conne-cting a regular VCR to the Video input.2. Insert a video tape into the VCR and pressPLAY on the VCR. (Refer to the VCR owner smanual.)3- To avoid picture noise (interference), leave an adequate distance between theVCR and TV.VCR12HDMIHDMIHDMI InputHow to connectConnect the cables from the external equipment'soutput jacks to the TV input jacks, as shown in the figure.How to use1. Select the input source by using the INPUTbutton on the remote control.2. Operate the corresponding external equipment.Refer to external equipment operating guide.