Menu OperationsFunction Menu Options ContinuedNote: Select CC1 for full translation of the primary language such as English inyour area. Select CC2 for secondary language translation such as French orany other language that may be broadcast in your area.4.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF.5. RESET : Press VOL+ to reset some settings to the factory default .To set On, the screenwill be in blue screen after 3 seconds if there is no signal.Adjust Menu Options1. Press MENU and VOL+/VOL- button until the following menu appears on thescreenADJUSTAUTO CONFIGPHASECLOCKH POSITIONV POSITIONNote: This menu is only appears in PC mode .2. Press CH+/CH- button to enter the adjust menu and to go up and down toselect the desired option .3.Press VOL+/VOL- button to increase and decrease the level to adjust theselected option to your preference .4. Repeat step 2 and step 3 until desired quality has been achieved ..Functions:AUTO CONFIG : Is opted for adjustment of picture location frequency and phaseparameters .PHASE : Removes any horizontal distortion and clears or sharpness the displayedcharacters .CLOCK : Adjust the TFT-LCD to match the PC input sourceH-POSITION : Picture horizontal position adjustV-POSITION : Picture vertical position adjust .0505050