Haier L1949 User Manual

Haier L1949 User Manual Manual pdf 33 page image

1.Supporting media and file format:Digital pictures (.JPG) and digitalmusic (.MP3) filesDue to differences in the file code andfile mode, It is possible that somefiles cannot be read.2.Before starting operation, verifyUSB storage device is of FAT32 andFAT file system format. At present,this television does not support NTFSand the file systems of other format.3.External card reader supports mostdigital cards available in the market.Readable digital cards are classifiedaccording to the property of cardreaders and can be connected tomobile hard disks (working voltage5.0V, working current not over 500mA).4.The television operation may behalted due to excessive rate ofinformation code errors. In such case,restart the system. Please note -there are many nonstandard USBmobile devices in the market. If anonstandard device is used then anidentification problem may occur.USB InputTo play pictures1.Press USB button on the remote toenter stream media system.The system start up takes about 3seconds. Then insert the USB drivein the USB input.2.Press VOL- VOL+ button to select Picturefolder. Press ENTER to enter.3.Press CH+ /VOL- VOL+ button to selectdesired picture, and then pressENTER button to enter the playinterface.4.Press the button on the remote controlto select the adjusted item, pressENTER button to confirm.5.Press EXIT button to return to theprevious menu.Press USB button to exit the USBmode.///CH-PLAY/PAUSEREVSTOPPREVREPEATNEXT1 2233445566771Note you may play the pictures amongselected.1.Play mode: None/Dissolve/Wipe right/Wipe left/Wipe up/Wipe down/Box in/Box out2.Play time: Short/Medium/Long;3.File name 4.Pause/Play5. Duration/Rotate 6.Effect7.Infomation1.Play or pause;2.Stop;3.Repeat;4.No available;5.No available;6.Play previous picture;7.Play next picture.