External Equipment ConnectionsTFT -LCD television Owner’s Manual 12depending on your set-top box connectionsavailable. Then, make the corresponding audioconnections.How to useTurn on the digital set-top box.A(Refer to the owner’s manual for the digital set-top box.)Use SOURCE on the remote contralto select PC orBHDMI (Y, Pb/Cb, Pr/Cr ) mode.PressC Play button on external equipment forprogram play.Y PbDIGITAL OUT HDMI IN(COAXIAL)PC/DVI AUDIO INPr/PC SetupHow to connectUse the TV’s PC IN port for video connections.AThen, make the corresponding audio connection. IfBusing a sound card, adjust the PC sound as required.How to useTurn on the PC and the TV.ATurn on the display by pressing theB POWER buttonon the TV’s remote control.Use SOURCE on the remote control to select PC source.CCheck the image on your TV. There may be noiseD associated with the resolution, vertical pattern,contrast or brightness in PC mode. If noise ispresent, change the PC mode to another resolution,change the refresh rate to another rate or adjust thebrightness and contrast on the menu until the pictureis clear. If the refresh rate of the PC graphic cardcan not be changed, change the PC graphic card orconsult the manufacturer of the PC graphic card.HDMI INDIGITAL OUT(COAXIAL)PC/DVI AUDIO INY Pb Pr PC INNoteAvoid keeping a fixed image on the TV’s screen forRalong period of Time. The fixed image may becomepermanently imprinted on the screen.The synchronization input form for Horizontal andRVertical frequencies is separate.To obtain the best picture, do not play the USB,RYP bPr, HDMI or P source at the same time.