Haier L30CV6-A1 Owner's Manual

Also see for L30CV6-A1: User manual User manual

Contents

Haier L30CV6-A1 Owner's Manual Manual pdf 20 page image

Some external signal sources, such as VCR, video camera or PC,can be linked to the television.A/V INPUT1 Connect the audio output terminal of VCD.to the AUDIO-IN input terminal of LCD TV;2 Press button to select multi audio mode;3 Press PLAY button of the VCD and begin to watch.INPUTIf we select the S-VIDEO as the signal input terminal,the picture effect would be better than the (A/V) video inputterminal.1 Connect the S-VIDEO input terminal of DVD to theS-VIDEO input terminal of TV2 Connect the left/right audio output terminal of DVD tothe corresponding terminal3 Press button repeatedly till you get4 Press the PLAY button on the DVD player ,and the TV would playthe program of the DVD disk.INPUT S-VIDEOS-VIDEO INPUTAUDIO INL RS-VIDEOIN VIDEO INAUDIO INL RS-VIDEOIN VIDEO INDTV INPUT1 The chromatism(Y/PbCb/PrCr) terminal connect thechromatism output terminal of the picture output equipmentsuch as the DVD,HDTV.and the audio may transfersthrough the AUDIO IN terminal.2 Press the button to select YCbCr mode or theYPbPr mode3 Press the PLAY button on the equipment to watch the TV.INPUTL RAUDIO IN Y Cb/Pb Cr/PrHeadphone portPlug the headphone in the television headphone port, then thetelevision program sound will be heard from the headphone, notby the television speaker. Press VOL+/- buttons to increase ordecrease the sound volume. No sound will be heard if MUTE buttonis pressed.POWER ANT.PC-AUDIO INHEADPHONEAUDIO INL R L RSCARTS-VIDEOINAUDIO IN Y Cb/Pb Cr/PrVIDEO INEXTERNAL AUDIO AND VIDEO DEVICE CONNECTIONSANTENNA INPUTConnect the CATV or antenna to theANT input terminal of TFT-LCD;NOTE: For better effect of the signal, it is recommendedthat you use an outdoor aerial or coaxial cable.Laser DVD with output terminalLaser DVD with output terminalLaser DVD with output terminal