Haier L40A9-AD Owner's Manual

Haier L40A9-AD Owner's Manual Manual pdf 14 page image

PCCOMPONENTPr/CrPb/CbYL-AUDIO-R ANT INL-AUDIO-RPCL-AUDIO IN-RVIDEO INDVI RS-232PC setupHow to connect1. To get the best picture quality, adjust the PC graphics card to ( 60Hz.2. Use the TV`s RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections,depending on your PC connector.If the graphic card on the PC does not output analog and digital RGB simultaneously, connect onlyone of either RGB INPUT or DVI INPUT to display the PC on the TV.If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to eitherRGB or DVI; (the other mode is set to Plug and Play automatically by the TV.)3. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound asrequired.How to use1. Turn on the PC and the TV.2. Turn on the display by pressing the POWER button on the TV's remote control.3. Use PC/DVI on the remote control to select PC or DVI source.4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern,contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution,change the refresh rate to another rate or adjust the brightness and contrast on the menu until thepicture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphiccard or consult the manufacturer of the PC graphic card.NOTES:1 Use a DVI cable.2 Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image maybecome permanently imprinted on the screen.3 The synchronization input form for Horizontal and Vertical frequencies is separate.L40A9-AD->1024x768),External Equipment Connections11