Haier L42A9-AK Owner's Manual

Also see for L42A9-AK: Owner's manual Owner's manual Owner's manual Service manual

PC settingPress PV/DVI button to select PC or DVI mode.PC setting30Adjust menuIn VGA and DVI input mode, H-Position and V-Position can be adjusted toeliminate transverse line interference and decentered picture.Display Mode NormalColor Temperature NormalBlack Stretch OnAdjustRGBDefaultAuto Sync.BCAOnly be adjustablein the VGA/DVI mode.1 Press MENU button and VOL+/VOL- button , till the ADJ.Menu display on the screen.2 Press CH+/- buttons to select the item to be adjusted, thenpress VOL+/- buttons to adjust.Note:1. As adjusting H position or Vposition parameter, It isnatural that the picture willhave faintness once in a whileif the range is more, then toadjust contrarily to normalposition.2. H-position,V-position,AutoAdjust are not available in TVmode.3. Auto Adjust is not availablein AV and S-VIDEO mode. H Size Horizontal size of picture can be adjusted in this item.H Position: Horizontal position of picture can be adjusted in thisitem.V Size: Vertical size of picture can be adjusted in this item.V Position: Vertical position of picture can be adjusted in thisitem.Fine Tune: Adjust phase to the best effect suiting for VGA signal.AdjustPress CH+/- buttons to selectAdjust, then press VOL-/+buttons to enter the sub menu.H SizeH PositionV SizeV PositionFine TuneBCA00000This will adjust the picture of H-positon, V-positon, H-size, V-sizeand Fine Tune.