DVI-DTV OUTPUT R AUDEO LRGB-DTV OUTPUT R AUDEO L Y Pb Pr R AUDEOAUDIO AUDIODVI INCOMPONENT INAUDIOVGA INDVIVGA Pr/Cr Pb/Cb Y L RAUDIOAV INAUDIOCOMPONENT INS-VIDEOPr/Cr Pb/Cb Y L R VIDEO L RDVD setupHow to connect1. Connect the DVD video outputs (Y, Pb/Cb,Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)INPUT jacks on the TV and connect the DVDaudio outputs to the AUDIO INPUT jacks onthe TV, as shown in the figure.2. If your DVD only has an S-Video outputjack, connect this to the S-VIDEO input onthe TV and Connect the DVD audio outputsto the AV IN jacks on the TV, as shown in thefigure.NOTE: If your DVD player does not havecomponent video output, use S-Video.How to use1. Turn on the DVD player, insert a DVD.2. Use the S-Video button on the remotecontrol to select S-VIDEO mode.3. Press Play button on external equipmentfor program play.4. Refer to the DVD player's manual foroperating instructions.External Equipment ConnectionsDVDorDTV setup-To watch digitally broadcast programs,purchase and connect a digital set-top box.How to connectUse the TV`s COMPONENT (Y, Pb/Cb,Pr/Cr) INPUT jacks, VGA or DVI port forvideo connections, depending on your set-top box connections available. Then, makethe corresponding audio connections.How to use1. Turn on the digital set-top box. (Refer tothe owner`s manual for the digital set-topbox.)2. Use PC/DVI on the remote control toselect PC or DVI (Y, Pb/Cb, Pr/Cr) mode.3. Press Play button on externalequipment for program play.Digital Set-top Boxor or11