Haier LE24T3 Owner's Manual

Also see for L24K3: User manual

Haier LE24T3 Owner's Manual Manual pdf 13 page image

Basic Receiving and Playing OperationsLCD television Owner’s Manual 13to confirm the switching to TV input terminal. Afterswitching, the signal source menu disappears, and at theupper right corner of screen displays the information ofcurrent signal source.Pressing this key repeatedly can exit from the signalsource menu.In case of no other operation, the signal source menuwill automatically disappear upon reaching the OSDdisappearance time preset in the main menu.:Move :OKOKSourceTVAVComponentPCHDMIUSBSearching ChannelIn this section, how to use the remote control to setchannel is explained. You can also use buttons on the TVset to set channel.Channel EditNote: Only available in the source of TV and Tuning lockin the H.Lock menu is off.PressA MENU on the remote control unit or MENUon the TV’s front panel to display main menu,and then press / to select Tuning menu.PressB / to select the Channel Editoption, and then press OK to enter submenu.Search 112.25MHzFine Tune 112.25MHzColor system PALSound system DKSkip OFFMenu OKReturn Move OKChannel EditSearchPress / to select the Search option, andfinally press /to start manual search. Uponfinding a program, the search will automaticallystop, and the program will be stored onto thecurrent channel. You may stop the search bypressing OK or MENU.Fine TunePress / to select the Fine Tune option, andthen press / to start UP or DOWN fine tuninguntil obtaining a relatively good picture effect. Thefine tuning function is for the purpose of improvingpicture effect through fine tuning when that of acertain program is not good enough. Normally,the optimal picture effect can be obtained withoutfine tuning when watching TV programs, and finetuning is to meet the need of adjusting a certainprogram.Color systemPress / to select the Color Systems option,and then press / to select correct colorsystem.The TV is designed with four systems for yourchoice, i.e. Auto, PAL , SECAM, NTSC and NTSC443.Generally, the system is set as Auto and it is notnecessary to make an adjustment. The system isnormally set as Auto during auto search.Sound systemThe TV is designed with four systems for yourchoice, i.e. D/K, M, B/G and I. Generally, it is notnecessary to adjust the system. The system isnormally set as DK during auto search.SkipWhen the skip is set ON, the channel will beskipped when pressing CH or CH and only canbe selected by pressing 0-9 numerical keys.