Haier LE32A300 User Manual

Haier LE32A300 User Manual Manual pdf 17 page image

OperationTV LED-TFT Owner’s Manual EN-17Phase : This is used for adjusting the phase of pixel clockin PC mode.Quick MenuPress Q.MENU button to enter, This function includessome usual oprations about Picture,Sound,ColorTempeature, Sleep Timer, Aspect Ratio and Backlight.USB MODENoteThe diagrams in the following section are❏schematic and only for your reference. Please seethe actual product if necessary.TO USE THE USB DEVICESupported file formats:APhoto: *.jpg,*.bmp;tMusic: *.mp3,*.wma;tMovie: *.AVI,*.mpg,*.DAT,*.TS,*.MOV,*.mp4,*.VOB;tNoteDue to the particularity of file cording, some files❏may be unable to read.The USB Movie player can surpport codes as❏MPEG2, MPEG2_HD,MPEG4,MPEG4_HD,H.264.Some movie files may not be played naturallywhen its coding doesn't include in the codesupwards.Supported equipment:BSupport the USB flash disks that supports MassStorage Protocol and whose file system is FAT32.If USB equipment could not be identified dueto unsupported file system, please format theequipment to the above-mentioned file system.To achieve smooth playing, ensure the following:CThe file code rate should be lower than 300KB/S;tDue to the limitation of USB signal transmissiontdistance, it is recommended not to use USB patchcord, in case of using the cord, make sure that itslength is not over 1m;Use high-speed USB equipment in conformitytwith USB2.0 full speed Interface Standard; If USBequipment in conformity with USB1.1 full speedInterface Standard is used, the playing may beunsmooth.When connecting/removing the USBdevicePressA INPUT on the remote control unit to selectUSB option.Insert USB equipment into corresponding USBBinterface 2s after starting the system.After entering the system menu, pressC /on theremote control unit to select the require USB files,press OK button to confirm the selection and enterthe file list relative to the selection.PressD /on the remote control unit to select therequired file, press ENTER button to enter the selectedfile.To exit the streaming media playing system andEwatch a TV program, you must press EXIT button toreturn to the streaming media main menu at first (toprotect equipment), and then press INPUT to selectAIR or Cable to return to the TV mode.NoteWhile playing the USB, press EXIT button repeatly,the screen picture will return to USB main interface,and only at this time you can switch correspondingsignal sources by pressing INPUT again.Please do not unplug the USB device when theconnected USB storage device is working. When suchdevice is suddenly separated or unplugged, the storedfiles or the USB storage device may be damaged.Operating the USB device