Haier LE392D2320 Service Manual

Also see for LE39D2380: User manual Service manual Energy guide

Contents

11pressing the MENU button will exit the menu.2. Use the [VOL-] or [VOL+] buttons to highlight the desired menu icon.Press [ENTER] to select it.3. Use the [CH+] or [CH-] buttons to scroll up and down through the features.4. Follow the instructions on thescreen.5. Press [EXIT] to immediately exit the menu. Press once to display the on-screen menu, and press again to returnto normal view. If no buttons are pressed, the menu closes automatically after about 60 seconds.To exit the menus:Press [EXIT] (or [MENU])VIDEO1. Picture Mode: Use the [CH-] or [CH+] buttons to highlight one of the following options, then press [ENTER] toenter the sub-menu and press [VOL-] or [VOL+] to adjust.[Energy Saving] – Picture settings that conserve the most energy.[Mild] – Adjusts the brightness and contrast level, and lowers the sharpness for a soft picture viewing mode.[Standard] – Select for standard picture settings. Recommended for home entertainment.[Bright Room] – Select for enhanced picture brightness.[User] – Allows you to store your preferred settings.Note: Changing the settings below will automatically change the Picture Mode to User.2. Brightness: Adjust to brighten or darken the picture. Press [VOL-] to darken the picture. Press [VOL+] tobrighten the picture.3. Contrast: Adjust the white level of the picture. Press [VOL-] to decrease the contrast.Press [VOL+] to increasethe contrast.4. Saturation: Adjust the color saturation of the picture. Press [VOL-] to increase the color saturation. Press [VOL+]to increase the color saturation.5. Tint: Adjust the tint of the picture. Press [VOL-] to increase the red tones.Press [VOL+] to increase the greentones.6. Sharpness: Adjust to sharpen or soften the picture. Press [VOL-] to soften the picture.Press [VOL+] to sharpenthe picture.7. Color Temperature: Use the [CH-] or [CH+] buttons to highlight one of the following options, then press[ENTER] to enter the sub-menu and press [VOL-] or [VOL+] to adjust.