Haier LE40B650CF Instruction Manual

ChannelPictureAudioClockSetupLockDigital Scan Ch5StartOperation2. 1 )DTV Manual Tuning (DVB-T)All the channels including ATV, DTV and Radiocan be tuning by one time,if the Tune Type isDTV+ATV .All the stored channels will be disappear afterauto tuning .After auto tuning , the channel will skip tothe first DTV channel.2). Press theͩ Ʒ buttons to select DTV Manual Tuningand then press the OK button, if you select Air in AutoScan, you will enter DVB-T manual scan menu.4). Press the MENU button to return back to themain menu.5). Press the EXIT button to exit the menu.2. 2 )DTV Manual Tuning (DVB-C)1). Press the MENU button and then press theͩ Ʒbuttons to select the CHANNEL menu and thenpress the OK button.3). The DTV Manual Tuning screen will pop up.Press the buttons to select the desired UHF channelor press the OK button then input channel number. SelectStart to commence the search of that channel. When thesignal has been tuned, the picture and signal strength willbe displayed on the screen.1). Press the MENU button and then press thebuttons to select the CHANNEL menu and thenpress the OK button.If you select Cable in Auto scan,youwill enter DVB-C manual scan menu.ͩƷChannelPictureAudioClockSetupLockFrequency 474000KSymbol Rate 6875KModulaton AutoStart2). The DVB-C Manual Tuning screen will pop up.P/ks/s/Modulation), press OK to input Frequency and symbol,press to change Modulation press Start to commencethe search of that channel. When the signal has been tuned,the picture and signal strength will be displayed on thescreen.ress theͩ Ʒ buttons to select(Frequency /Symbol3). Press the MENU button to return back to themain menu.4). Press the EXIT button to exit the menu.3) ATV Manual tuning :You can change the sound system to search theanalog TVchannels and fine tune the channels , then storage thechannels you selected.1. Press teletext red button to storage to channelsafter manual tuning .2. If the number save to is the same as the numberCurrent CH, when you press Red button,the save tonumber will cover the Current CH number.Save to 1System BGCurrent CH1SearchFrequency 44.25 MHzFine tuneSaveATV Manual Tuning4). Channel edit:Press the ͊ or͌ Buttons to select Channel Edit in theChannel Menu. Then press the OK Button to enter the sub-Menu. Then you will need to select the channel you wishto edit.EN-167). If you want to skip the DTV tuning, press the MENU button tointerrupt the tuning half way. You will then go straight toATV tuning. You may repeat the above step if you also want toskip the ATV tuning. An installation reminder will appear thenext time you turn on the TV,if no channel is found.8). After tuning is complete, the channels are arranged in apreset order. If you wish to skip channels, modify the presetorder or rename channels, select P rogramme Edit underthe channel menu.FrequencyStrength 54177.50 MHzReturn Move OKOKMENUReturn Move OKOKMENUReturn MENU