Haier LE42H330 Owner's Manual

Also see for LD42K3: Service manual

Haier LE42H330 Owner's Manual Manual pdf 19 page image

Basic Receiving and Playing OperationsLED -LCD television Owner’s Manual 19Net UpgradePress / to select OK or Cancel to upgrade the TVset by internet and flash.Adjust MenuThe TV can be used as a display, and you may adjustrelevant settings. Press SOURCE to switch the signalinput to PC mode.PressA MENU to display the screen main menu, andthen press / to select the Adjust menu asshown in the below figure.PressB / to select the option to be adjusted.PressC / to adjust it.Image PositionThis is used to adjusting H-Position and V-Position.Horizontal-SizePress / to adjust it(0---100).Vertical-SizePress / to adjust it(0---100).Auto AdjustVertical and Horizontal position of picture can beadjusted in this item.ClockThis is used for adjusting the phase of pixel clock in PCmode.PhaseThis is used for adjusting H Position and V Position aswell as relative parameters in PC modes.ResetReturn to factory default settings.Time MenuPressA MENU button and then use /button toselect Time menu.PressB / to select the desired option, press OKto enter its submenu. ˖Current Time : The current time is calculated from themoment upon turning the TV on. At first, check whetherthe time indicated on the TV's clock is consistent with thestandard time of your time zone; if not, adjust the clock asfollows:Press• MENU on the remote control unit or MENUon the TV’s front panel to display the main menu,and then press / to select the Timer menu,afterwards press / to select the Current Timeoption, press OK to enter the submenu.Press• /to set hour and minute.Press• / to adjust the time.After finishing time setting, press• OK or MENU toconfirm.Off Time/ On Time: Set a time for the TV toturn off or on.This function allows the TV toautomatically turn on or enter standby modeupon reaching the preset time.Press OK to enter the setting screen, and then•press /to select ON or OFF, if you select ON,press / to set hour and minute. ON indicatesthe On/Off Time function is enabled while OFFindicates the function is disabled..• After finishing time setting, press OK or MENU toconfirm.NoteAfter setting the On/Off Time function, if the TV is ACoff or forcible DC off, the function will be automatically