Haier LE47H5000 User Manual
                         | |
Contents
| 
Basic Receiving and Playing OperationsLED Backlit Flat TV Instruction Manual EN-20EnSettingsPressA button to enter Cloud interface.PressB 634button to select Settings. Press OKto enter.PressC 6button to select the item which require tobe adjusted.Connecting to a Wired NetworkPressA 6button to select Ethernet, press OK toenter.PressB 6 button to select DHCP item, thenpress Save button, it will automatically finished.You can set up your TV to access the Internet throughyour local area network (LAN) using a wired orwireless connection.Connecting to a Wired Network. You can attach yourTV to your LAN using a cable (cable not included) inthree ways:• You can attach your TV to your LAN by connectingthe LAN port on the back of your TV to an externalmodem using a Cat 5 cable. See the diagram below:LAN5IF.PEFN1PSUPOUIF8BMM &YUFSOBM.PEFN"%4-7%4-$BCMF57-"/$BCMFOPUTVQQMJFE.PEFN$BCMF OPUTVQQMJFE#BDLPG57• You can attach your TV to your LAN by connectingthe LAN port on the back of your TV to a router.which is connected to an external modem. Use a Cat5 cable for the connection. See the diagram below:LAN5IF.PEFN1PSUPOUIF8BMM &YUFSOBM.PEFN"%4-7%4-$BCMF-"/$BCMFOPUTVQQMJFE-"/$BCMF OPUTVQQMJFE.PEFN$BCMF OPUTVQQMJFE#BDLPG57 3PVUFS• Depending on how your network is configured,you may be able to attach your TV to your LAN byconnecting the LAN port on the back of your TVdirectly to a network wall outlet using a Cat 5 cable.See the diagram below. Note that the wall outlet isattached to a modem or router elsewhere in yourhouse.LAN5IF.PEFN1PSUPOUIF8BMM-"/$BCMF OPUTVQQMJFE#BDLPG57NoteThe terminals (the position of the port and thetype) of the external device may be differentdepending on the manufacturer.If the IP address allocation by the DHCP serverhas failed, turn the external modem off, turn iton again after at least 10 seconds and then tryagain.For the connections between the externalmodem and the router, refer to the owner’smanual of the corresponding product.You can connect the TV to the LAN directlywithout connecting it through a router.You cannot use a manual-connection-type ADSLmodem because it does not support DHCP. Youhave to use an automatic connection-type ADSLmodem.Connecting to a Wireless NetworkPressA 6button to select WI-Fi, press OK toenter, To see available networks, turn Wi-Fi On.PressB 6 button to select Wireless Settingitem,press OK button to enter.PressC 6 button to select the network you need |
Related manuals for Haier LE42H5000
manualsdatabase
Your AI-powered manual search engine