Haier LEB32T3 Owner's Manual

Also see for LEB32T3: Owner's manual

Haier LEB32T3 Owner's Manual Manual pdf 20 page image

Troubleshing and Specification20 LED -LCD television Owner’s Manualpress / to set hour and minute. ON indicatesthe On/Off Time function is enabled while OFFindicates the function is disabled..• After finishing time setting, press OK or MENU toconfirm.NoteAfter setting the On/Off Time function, if the TV is ACoff or forcible DC off, the function will be automaticallycleared.On channel: This function is used in combination withthe On/Off Time function. When the TV turns on uponreaching the On time, it automatically enters the presetchannel.Press• /to set the On Channel or OFF.Remind Time/Remind channel: The remind time andremind channel functions allow the TV to automaticallyenter the preset channel at preset time. If the TV is AC offor forcible DC off, the preset time will be cleared.Press• MENU on the remote control unit or MENUon the TV's front panel to display the main menu,and then press / to select the Timer menu,afterwards press / to select the RemindTime option.Press OK to enter the setting screen, and then•press / to select ON or OFF, if you select ON,press / to set hour and minute, and thenpress / to adjust time.After finishing time setting, press• OK or MENU toconfirmPress• / to select the Remind Channeloption, and press / to set the found.Lock SetupThe television has the function of security default lock.Password needs to be entered when the program lockmode is to be set.How to use the password functionPress H. LOCK, the TV screen will display Enter Passwordto prompt the user to enter a correct password bypressing corresponding numerical keys; if the passwordis correct, the user enters the Lock Set menu; if incorrect,the user is required to enter a password again.If there is no operation for a few seconds, the display willautomatically disappear.The Lock Set menu is as follows:Change Password OKTuning LockPreset SourcePreset ProgSource Lock OKChild LockMax Volume 100Power On Volume offUnlock OKoffoffoffoffLock SetChange PasswordAfter entering the Lock Set menu, press / toselect the Change Password option, and then press/ to display the Change Password menu,afterwards enter a new 4-digit password by pressingnumerical keys and repeat entering this passwordonce, and finally select the option to be confirmedand press MENU to confirm, indicating the successfulchange of password.If the user does not want to change the password inhalfway, he may press MENU to exit from this menu.NoteThe initial password is 0000, and the password settingwill not be changed after executing the Unlockoption.Tuning LockPress / to select the Tuning Lock option, andthen press / to set ON or OFF.(If set ON, the Tuning Menu is not available in TVmode. To make any operation related to the TuningMenu, it is necessary to enter the Lock Set menu toset Tuning Lock OFF or execute the Unlock option.)Preset Source SettingPreset Source may be set as Off, TV, AV,Component,HDMI, PC and USB. When the Preset Source is set asTV, after entering the Preset Channel menu, press/ to select the preset channel, and the channelwill be forcibly switched to the preset one uponturning the TV on; when the Preset Source is set asother signal sources, the TV will be forcibly switched tothe preset source upon turning on. For example, whenthe Preset Source is set as YPbPr /YCbCr, the TV will beswitched to YPb Pr/YC bCr upon turning on; when set as