Haier LT19A1 Service Manual

Also see for LT19A1: User manual

Haier LT19A1 Service Manual Manual pdf 26 page image

263.3 Full Scart ConnectorPin No. Description Pin No. Description1 Audio Output Right 12 N.C.2 Audio Input Right 13 GND(Red)3 Audio Output Left 14 GND(Blanking)4 GND(Audio) 15 Red Input5 GND(Blue) 16 RGB Switching Control6 Audio Input Left 17 GND(Video Input & Output)7 Blue Input 18 GND(RGB Switching Control)8 Switch Signal Input (Fast Blanking) 19 Video Output(Composite)9 GND(Green) 20 Video Input(Composite)10 N.C. 21 Common Ground11 Green Input3.4 Signal Type● TV RF input system - Aerial or cable should support PAL/SECAM/DVB-T● TV RF input level - 10mV (80dBuV) typical, 30dBuV ~ 100dBuV receiving capability, terminated with inputimpedance of 75Ω.● CVBS input - 1000mVpp (including 300 mV sync level), terminated with input impedance of 75Ω.● S-Video input - Y: 1000mVpp (include sync), C: 300mVpp terminated with Input Impedance of 75Ω.● Component video input - Y: 1000mVpp (include sync), PbPr: 700mVpp terminated With Input impedance of 75Ω.Support 480i/p, 576i/p, 720p, 1080i at 50Hz or 60Hz refresh rate.● Audio input - Sensitivity 500mV (rms). For rated power, the amplifier should be able to handle inputsignal up to 2.0V, input impedance >10KΩ.● SCART input / output - Full SCART, includes RGB in, CVBS (audio L/R) in/ (TV out).Half SCART includes S-Video in, CVBS (audio L/R) in/ (TV out).● HDMI (High Definition Multimedia Interface)-Support 480i /480p, 576i/576p, 720p, 1080i format with HDCPDigital interface with 4 channels TMDS signal● CI Slot - PCMCIA card 5V input.● PC VGA input - 700 mV input level, TTL level sync, RGB in 75Ω impedance.● PC Audio input - 500 mVrms input level, impedance > 10 kΩ.● Headphone output - 4 mW (Typ.) at 32Ω, impedance between 8 - 600Ω.● SPDIF output - Level: 0.5V+/-0.1V at 75Ω Square Wave.SPDIF output sync SCART audio out.