Haier LT26K3 Instruction Manual

Also see for LT26K3: Instruction manual

Contents

Haier LT26K3 Instruction Manual Manual pdf 46 page image

TROUBLESHOOTINGTo assist in location of possible faults use the help guide below:Note:1.If the fault can not be repaired using the above guide consult with your local authorizedservice centre.2.The TV set must only be repaired by a qualified registered service person. Never attempt toremove the back cover as the TV set has dangerous voltages in side that may cause afatally or fire.No picture, no sound Verify if the television is properly plugged in.Verify if the television has a proper supplied power source.Verify if electricity is available.Blank screen Verify if correct signals are input.Operate the remote to change signal input to correct input.Restart the television if power supply is interrupted.No soundPress MUTE button and verify if Mute mode is set.Switch to other channel and verify if the same problemhappens.Press VOL+ button to see if the problem can be solved.Poor sound Verify if sound system is correct. Refer to user's manualfor adjustment.No picture in somechannelVerify if correct channel is selected.Adjust the antenna.No color for some channelprogram (black and white)Verify if the same problem exists in other channels.Check out of picture and sound systems.Refer to relative instructions in the Manual for coloradjustment.Spots with some orall picturesVerify if the antenna is correctly connected.Verify if the antenna is in good condition.Make fine adjustment of channel.Television out of controlDisconnect the television from power supply and 10seconds later, connect the television to the power supply.If the problem still exists, contact authorized after-salesservice for technical assistance.