Haier LT32A1 Service Manual
Also see for LT26A1: User manual
                                                                                                                                                | |
Contents
| 
283.5 Signal Type● TV RF input system - Aerial or cable should support PAL/SECAM/DVB-T● TV RF input level - 10mV (80dBuV) typical, 30dBuV ~ 100dBuV receiving capability, terminated with inputimpedance of 75Ω.● CVBS input - 1000mVpp (including 300 mV sync level), terminated with input impedance of 75Ω.● S-Video input - Y: 1000mVpp (include sync), C: 300mVpp terminated with Input Impedance of 75Ω.● Component video input - Y: 1000mVpp (include sync), PbPr: 700mVpp terminated With Input impedance of 75Ω.Support 480i/p, 576i/p, 720p, 1080i at 50Hz or 60Hz refresh rate.● Audio input - Sensitivity 500mV (rms). For rated power, the amplifier should be able to handle inputsignal up to 2.0V, input impedance >10KΩ.● SCART input / output - Full SCART, includes RGB in, CVBS (audio L/R) in/ (TV out).Half SCART includes S-Video in, CVBS (audio L/R) in/ (TV out).● HDMI (High Definition Multimedia Interface)-Support 480i /480p, 576i/576p, 720p, 1080i format with HDCPDigital interface with 4 channels TMDS signal● CI Slot - PCMCIA card 5V input.● PC VGA input - 700 mV input level, TTL level sync, RGB in 75Ω impedance.● PC Audio input - 500 mVrms input level, impedance > 10 kΩ.● Headphone output - 4 mW (Typ.) at 32Ω, impedance between 8 - 600Ω.● SPDIF output - Level: 0.5V+/-0.1V at 75Ω Square Wave.SPDIF output sync SCART audio out.● Amplifier output - 5W+/-10%● Speaker - 8Ω |
Related manuals for Haier LT26A1
manualsdatabase
Your AI-powered manual search engine