Haier P42A1-AKS Owner's Manual

Also see for P42A1-AK: Service manual Owner's manual

Haier P42A1-AKS Owner's Manual Manual pdf 13 page image

HDMI/DVI OUTPUT R AUDEO LRGB-DTV OUTPUT R AUDEO L Y Pb Pr R AUDEOHDMI/DVI VIDEOVGA AUDIODVI INAUDIOVGA IN COMPONENT INPr/Cr Pb/Cb Y L-AUDIO-RANT INCOMPONENT INPr/Cr Pb/Cb Y L-AUDIO-R SCART2 SCART1How to connect1. Connect the DVD video outputs (Y,Pb/Cb, Pr/Cr) to the YUV IN jacks on the TVand connect the DVD audio outputs to theAUDIO IN jacks on the TV, as shown in thefigure.2. If your DVD only has an SCART outputjack, connect this to the SCART input onthe TV. as shown in the figure.NOTE: If your DVD player does not havecomponent video output, use S-Video.How to use1. Turn on the DVD player, insert a DVD.2. Use the TV/AV and VOL+/- button on theremote control to select SCART mode.3. Press Play button on external equipmentfor program play.4. Refer to the DVD player's manual foroperating instructions.-To watch digitally broadcast programs,purchase and connect a digital set-top box.How to connectUse the TV`s YPbPr IN and AUDIO IN jacks,VGA or HDMI/DVI VIDEO port for videoconnections, depending on your set-topbox connections available. Then, make thecorresponding audio connections.How to use1. Turn on the digital set-top box. (Refer tothe owner`s manual for the digital set-topbox.)2. Use TV/AV on the remote control toselect mode.3.Press Play button on external equipmentfor program play.DVIDTV connectionDVD connectionExternal Equipment ConnectionsDVDorDigital Set-top Boxor or